09-30-2021 06:34 AM
I want to install a nest doorbell where my current doorbell is. The problem I have is the current doorbell is on a brick that is sunken between 2 other bricks. So it is about the height of a brick 3 inches.
if I could install the nest horizontally I’d have no problems. But that doesn’t seem to be an option.
im wondering If there is a mount I can use to bring the doorbell out about an inch from the wall.
10-08-2021 03:27 PM
Hi there,
Sorry for my late response. Thank you for all of your patience while waiting for a reply. I just wanted to make sure that your issue is addressed. I can definitely understand how frustrating your situation must be. I would love to help you find a solution to this issue.
Do you still need help with this issue?
What troubleshooting steps have you done thus far?
Please let me know if you need further assistance.
Best Regards,
Brad.
10-10-2021 09:15 AM
Hi,
thank you for replying. No the issue hasn’t been addressed.
options I’ve considered
1) trying to find a mount that would put the doorbell out about an inch to be installed
2) look at competitor doorbells.
10-12-2021 03:14 PM
I am sorry to hear that you are still having the same issue! I can imagine it's been quite frustrating. Unfortunately, there is no such mount. There is a wedge sort of mount to face the doorbell out instead of straight on, but from the sounds of it, it probably wont be the fix for this issue. I would suggest looking online to see if there are any other options out there to use.
Please let me know if you need further assistance.
Best Regards,
Brad
10-19-2021 09:51 AM
Hey folks.
Just checking in to see if you still need assistance with this issue. If so, please let me know and I would love to look into this further for you!
Best Regards,
Brad.
11-12-2021 01:27 PM
Hey folks,
It looks like we haven't heard back from the OP so I'm going to go ahead and lock the thread. If you have any further questions or concerns, feel free to create a new thread.
Have a great day,
Garrett DS