04-09-2022 03:45 AM
Hello,
Looking for advice if possible regarding placement and positioning of my cameras. I have the Nest Camera Outdoor battery.
I've tried changing my camera positions so that night vision is captured as best as it can.
With the attached samples, are the walls causing blur because of the IR or is this what to expect from night vision?
They are installed approximately in the house image where there is a red dot.
Any suggestions would be great. Thanks!
04-09-2022 04:58 AM
Google the Wasserstein outdoor camera hood. The hood helps with the light reflection m. Your not done though, before installing the hood you need to put black tape on the lip of the hood. The cover is white and that will reflect more light. The hood helps deflect outside light interference, the black tape stops the light from bouncing in front of the IR sensor.
04-09-2022 05:32 AM
Thanks! I do have the Wasserstein hoods installed already, but never looked up the black tape solution I'll try that.
Is my location closer to 'corners' affecting it at all?
04-13-2022 08:48 PM
Hi folks,
I appreciate the help @S3bryan. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know.
Thanks,
Steve
04-14-2022 02:54 AM
Hi Steve,
Well I can't seem to fine tune my camera positions well enough to get anything better than this.
My question is, is this standard, or is there anything else I should be doing?
04-14-2022 02:55 AM
04-14-2022 09:34 AM
Hi there,
Just checking in to see if you still need assistance with this issue. Please let me know if you need further assistance.
Best Regards,
Brad.
04-20-2022 09:15 AM
Hey folks,
It looks like we haven't heard back from the OP so I'm going to go ahead and lock the thread. If you have any further questions or concerns, feel free to create a new thread.
Have a great day,
Garrett DS
04-09-2022 06:33 AM
The spotlight, light in confusing the IR Sensor