03-31-2022 04:24 PM
I have a Nest Ourdoor cam that the cord has degraded and the wires are now exposed and no longer send power to the camera. Appears the rubber/plastic has degraded from UV exposure do to mounting location. I temporarily put electrical tape on the wiring; however, it appears this is not going to work very long. Can I replace this cord?
05-05-2022 10:20 AM
Hi there,
I apologize for my late response and thank you for all of your patience while waiting for a reply. I definitely understand how frustrating your situation must be, and I wanted to make sure that your concern was acknowledged. Do you still need help with this issue?
Best Regards,
Brad.
05-10-2022 11:40 AM
Hi there,
Just checking in to see if you still need assistance with this issue. Please let me know if you need further assistance.
Best Regards,
Brad.
05-13-2022 02:26 PM
Hi there,
Just checking in to see if you still need assistance with this issue. We'll leave this topic open for another 24 hrs in case there are any follow up questions or comments. Please let me know if you need further assistance.
Best regards,
Brad
05-16-2022 10:36 AM
Hey Folks.
At this time, I'll go ahead and lock this thread. If you're still experiencing problems, feel free to start a new thread and we'll be happy to help.
Best Regards,
Brad.