Honeywell heat pump to Nest wiring

[Nesting]

I have a Honeywell heat pump and I am facing cooling issues after installing the Nest learning thermostat. I might have wrongly installed the wiring and need help. I have 6 wires (Aux/E, G, O/B, C, Y, R, Rc) and an R/Rc jumper (see image below).

1. Aux/E -> Do I connect this to W2/Aux or *?
2. G-> G
3. O/B-> O/B
4. C->C
5. Y->Y1
6. R (with a jumper to Rc)-> Do I connect this to Rh or Rc?

[gregshaffer19]

without knowing the manufacture of your heating and cooling system it’s hard to tell you what to energize the reversing valve. They will  energize in either cool ( most common) or in heat. This is a honeywell Rth  series thermostat it has the jumper wire between r-rh which isn’t needed with the nest. Also the rth series uses aux/e for both functions If you place the white wire on w1 red to r you should be in business