06-02-2022 03:14 PM
Hello, I recently installed out nest learning thermostat at our house but I can't seem to get it to work properly. Heat blows out cool air, cool blows hot air. Both heat and cool don't seem to blow out as much air as it used to with the old thermostat. Clearly I've done something wrong.
Here's the old thermostat:
So basically, how do I properly wire this on the nest learning thermostat?
Answered! Go to the Recommended Answer.
06-03-2022 11:35 PM
This is how I would wire it.
White - AUX to W2/AUX (jumper to E not needed)
Green - G to G
Orange - O/B to OB
Blue - B C to C
Yellow - Y to Y1
Red - R to Rc (jumper to Rc not needed)
You should also reset it to factory defaults and set it up again
06-03-2022 11:35 PM
This is how I would wire it.
White - AUX to W2/AUX (jumper to E not needed)
Green - G to G
Orange - O/B to OB
Blue - B C to C
Yellow - Y to Y1
Red - R to Rc (jumper to Rc not needed)
You should also reset it to factory defaults and set it up again
06-05-2022 11:28 AM
It worked. Thanks so much.
06-06-2022 04:07 PM
06-07-2022 08:25 AM
Sure. One final question.
Is it possible to save multiple schedules? I really only need 2 for warm and cold weather.
06-07-2022 12:00 PM
Hi 3dwally,
Thanks for the response. You can create 1 schedule each for heating and cooling. You can click on this link to learn more about this.
Thanks,
Edward
06-10-2022 05:26 PM
Hey 3dwally,
Checking back in — we hope you got the answer you're looking for. Let us know if you have more in mind.
Best,
Melba
06-12-2022 02:04 PM
Hi 3dwally,
Just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Thanks,
Edward