Installing google power connector at control panel

[Aadityakiri]

I have a 2 zone HVAC system and thus have installed 2 Google nest thermostats. Both were alerting me as to needing a c wire for adequate power supply. Google offers their power connector as a substitute. Now, I have tried to install the power connector at the control panel such that one device will suffice for both zones but I am unclear as to how that may work. I installed the power connector at what appears to be the main system on the control panel, which is an EWC ncm 300 panel, unsuccessful. When I install the power connector to a single zone, that works fine however just for a single zone. Is there a way to use one power connector for both zones or am I stuck needing to get an additional power connector? 

 

[Patrick_Caezza]

No, just like you need to have a separate thermostat for each zone, you will need to have a separate Nest Power Connector for each thermostat. The Nest Power Connector becomes an extension of the Nest Thermostat.

[MelbaDT]

Hey folks, 

Thanks for responding, Patrick_Caezza. 

Aadityakiri, I hope you've got the answer you're looking for. I also suggest that you check on this link to know more about our Nest Power Connector: https://bit.ly/3z34z2e

Feel free to reply back to this thread should you have more questions in mind. 

Best, 

Melba

[MelbaDT]

Hey Aadityakiri, 

Checking back in should you still need our help. 

Best, 

Melba

[MelbaDT]

Hi, 

I haven't heard from you in a while so I'll be locking this thread if there is no update within the day. If you have any new issues, updates or just a discussion topic, feel free to start a new thread in the community.

Best, 

Melba