01-09-2023 06:53 AM
Any thoughts on why it's telling me to check the heat wiring on each of the 2 new units installed? Both have all new 6 wire 18 ga. solid therm cable installed for later upgrades, both will give heat when called for, and there are no loose connections. I'm stumped, unless it's not interfacing correctly with the Argo relay box that all of the zones run through.
01-09-2023 05:08 PM
Did you tell it the correct type of heating system you have?
Hot water radiators?
01-12-2023 05:47 PM
Hey folks,
We appreciate your help here, Houptee.
McCann27, I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any concerns or questions from here, as I would be happy to take a closer look and assist you further.
Thanks,
Mel
01-16-2023 06:22 AM
Hello McCann27,
I wanted to stop by and see how I could help.
As stated by Houptee, you might need to re-configure your heating system. Please have a look at this article and let us know if you need more help.
Regards,
Mark
01-17-2023 06:27 AM
Hi McCann27,
I'm checking in to make sure that you've seen our response. Please let us know if you have any additional questions or concerns before we lock this thread in 24 hours.
Thanks,
Mark