09-16-2021 03:02 PM
I have replaced my Honeywell with the following configuration:
Y into Y1
G into G
C into C
W into W
and R into Rh
Brown unused.
Upon looking at the configuration on the Honeywell it notices the heater is a heating pump configuration. When hooking up the nest in the above fashion it only says conventional and AC wont blow cold air. Any help or recommendations are appreciated.
09-17-2021 01:53 AM
I too have similar problems. Sadly I am a renter in an apartment. They are old apartments and I think they may be not compatible even though Google said they were. So I may look into another smart thermostat.
10-06-2021 11:24 AM
Hey all,
I wanted to follow up with you, and see if you are still having any trouble with your system blowing hot air? Please let me know, as I would be happy to look into this further, and ensure you are good to go.
Best regards,
Jake
10-12-2021 10:22 AM
Hey there,
Just wanted to hop in here to see if we still needed help on this. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Have a great day.
Garrett DS
10-13-2021 10:29 AM
Hey folks,
It looks like we haven't heard back from the OP so I'm going to go ahead and lock the thread. If you have any further questions or concerns, feel free to create a new thread.
Have a great day,
Garrett DS