11-27-2021 09:53 AM
I just install my new nest thermostat. The current temperature reading is 3 to 5 degrees above ambient room temperature. I pulled the thermostat off and took a temperature reading of the base with all the wires connected. My laser thermometer read almost 80 degrees. The base is warm to the touch. I assume that is not normal and could be the reason the thermostat reads high. I reset all of the wires and checked to make sure they were stripped properly. Anyone ever see this?
07-06-2022 03:30 PM
Same here. Found two burned spots on the PC board in the base.
12-19-2022 11:00 AM
Were you ab;e to repair the Board?
12-23-2022 12:53 PM
Hey folks,
jtcnb, appreciate your response.
Chiming in to ensure everything is good here. Have you had the chance to try the suggestion above? If yes, how is it?
Best,
Mel
12-26-2022 02:47 PM
Hey there,
Checking back in should you still have some questions here. Let us know by replying to this thread.
Best,
Mel
12-27-2022 10:19 PM
Hi folks,
I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Thanks,
Edward