02-16-2023 10:42 AM
We recently had the Nest 3 installed on our narrow boat but the guy has hardwired the base plate into the control panel. We bought a stand with a view to using it away from the panel as the temperature there isn't what we'd like it to be using. However we find looking at installation instructions that we need the base plate to use the stand; is this right and if so what do we replace it with at the panel please?
02-16-2023 04:29 PM
My stat was supplied with a rectangular plate with a circular recess and a 90 ° stand with a circular base.
I think that the rectangular plate can be used on a vertical wall or as a base for the 90° stand
The 90° base can be used on its own - this is how I am using it.
You will have to look at how it is powered - mine uses the supplied plug and USB type cable - depending on how it is currently wired in the power supply may not be removable so you may need to get a second one.
02-20-2023 06:32 PM
Hey AliM23,
I'd like to jump in here and check if you've seen CoolerJack's response. Let us know if you need more help by replying to this thread.
Thanks,
Archie
02-23-2023 10:34 PM
Hey there,
I just wanted to follow up to see if you still need our help. Please let us know as we would be happy to answer any questions you may have.
Thanks,
Archie
02-23-2023 11:08 PM
Thank you for your help, it's all sorted now and working well on the stand. Cheers.
02-27-2023 07:53 PM
Hey AliM23,
That's great to hear! Let us know if you have other questions as I'll be locking the thread after 24 hours.
Thanks,
Archie