01-23-2022 08:38 PM
My nest told me I needed the Google power adapter to get it to function properly, however my control board has none of the se letters that I've been seeing everywhere. The terminals I have are T1, T2, F1, F2, A, A. I'll attach a picture of the board. I've tried running the "c" wire back on to one of the T connections (where the red and white are connected as they were previously) but I got a no power error. I also tried connecting it to one of the F terminals and it acted the same as if I hadn't added the adapter at all.
Can anyone help me out? I really can't afford to pay who knows how much for a specialist to connect a wire for me.
Thanks in advance
01-24-2022 06:47 AM
Diagram of the control board from the manual if this helps:
02-12-2022 05:14 AM
I just found this- the “pro” installation manual for the google nest power connector. On pages ############ it shows how to use a separate 24v transformer if the hvac system has no C wire.
https://storage.googleapis.com/support-kms-prod/k5rpNEXV1F0aVYhr8jN1L2GAxhcAPDXhk39r
02-12-2022 05:15 AM
That’s pages ten through eleven
06-07-2022 10:42 AM
Hey folks,
Thanks for visiting the Google Nest Community.
Since this thread hasn't had activity in a while, we're going to close it to keep content fresh.
If you have additional questions, feel free to submit another post and provide as many details as possible so that others can lend a hand.
Hope this helps!
Kind regards,
Ryan
02-12-2022 03:53 AM
I have a similar carline burner. We’re you able to figure this out? I was going to try the nest power connector.