Nest hub not working

[Dgriff]

Nest hub shows the g symbol but won’t factory reset. Tried many times.

[David_K]

Are you using the original power supply and adapter that came with your device?

Have you tried putting your device into recovery mode?

For Google Nest Hub (1st gen)

1. Unplug your device then hold down the volume button while plugging it back in.
2. Release the volume button once the device turns back on.
3. Once the device boots into recovery mode, factory reset the device (hold down both the volume up and volume down buttons at the same time).

For Google Nest Hub (2nd gen) and Google Nest Hub Max

1. At the back of the display, unplug the power cord and wait 10 seconds, then plug it back in and wait until the screen with the G logo shows up.
2. Repeat step one 10 more times (for a complete total of 11 times).
3. After plugging the power cord back in for the 11th time, wait a few moments for the device to reset.
4. It should announce “Welcome to Google Home” to let you know it’s ready to set up

[Azarco]

Hi there,

davidking we appreciate the help.

Dgriff checking back in to see if the troubleshooting steps shared by davidking helps. Let us know by updating this thread, and the community will be happy to lend a hand.

Keep us posted!

Best,

Alex

[Princesss]

Hi everyone,

We just want to check if you have seen our response posted above. Let us know if you have additional questions, otherwise we'll be locking the thread.
 

Best,

Princess

[Azarco]

Hey Dgriff,

One quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need assistance, feel free to start a new thread in the community and we’ll be happy to help.

Kind regards,

Alex