cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

WireGuard VPN Unable to Load Tunnels on Google TV Stream

WarsongPPN
Community Member

Hello everyone,

I recently installed WireGuard VPN on my Google TV streamer to enhance privacy and access region-locked content. While the installation went smoothly, I encountered some issues when trying to load and connect the VPN tunnels.

Issue Description
Whenever I attempt to load a VPN tunnel with WireGuard, the following happens:

The app freezes while trying to establish the VPN connection, with the screen stuck for several seconds.
Shortly after, the app fails to complete the connection and jumps back to the Google TV home screen, with WireGuard stopping entirely.
This prevents me from successfully using the VPN, whether I try to load the tunnel automatically or configure it manually.

Possible Cause
I suspect this issue might be related to the file management software I’m using. When accessing or editing WireGuard configuration files through a file manager, it seems to interfere with WireGuard’s operation. The file browser may not be handling the VPN configuration files’ paths or permissions correctly, causing WireGuard to crash when trying to connect.

Solutions Tried
Checked the configuration files: I’ve confirmed the configuration files work perfectly on other devices, such as my phone and computer.
Changed file browser: I tried using different file management apps to handle the WireGuard configuration, but the issue persists.
Reinstalled the app and restarted Google TV: I reinstalled WireGuard and restarted the device, but the problem remains unsolved.
Verified network connection: My network is functioning normally, and other apps can connect without issues when the VPN is off.
Looking for Help
Has anyone successfully set up WireGuard on Google TV? Can anyone recommend a file browser that works well with VPN configuration files? Or has anyone experienced similar issues with the app freezing and returning to the home screen, and found a solution?

I appreciate any suggestions or advice!

7 REPLIES 7

ByronP
Community Specialist
Community Specialist

Hi WarsongPPN,

 

Thank you for posting in the community. I'm sorry that you're having trouble connecting your Google TV Streamer with VPN tunnels. I understand how frustrating this must be when you already try troubleshooting the situation. I'm here to help.

 

To verify the VPN connection, please do the following:

 

Make sure your Google TV Streamer and casting device (Google TV) are connected to the same Wi-Fi network and check if VPN is configured on your Google TV.

 

To check the network of the streaming device, ask the customer: 

  1. Open the Google Home app and tap on the streaming device they want to check.
  2. In the top right corner, tap Settings.
  3. Scroll down, select Wi-Fi. Tap it to check the name of the connection network.

For Chromecast with Google TV and Google TV Streamer (4K), go to the top right corner of the Google TV screen and then All Settings and then Network and Internet.

 

In the mean time, please try to reboot your Google TV Streamer 4K:

 

From the streaming device

Ask the customer to: 

  1. Remove the streaming device from the power source.
  2. Leave the device unplugged for one minute, then plug it back in.

From Google TV

  1. Go to All Settings System.
  2. Select Restart. 

Let me know if you need any further questions.

 

Regards,

Byron

gsa123
Community Member

I have the same issue and only on Google TV Streamer (while having several Google TV 4k and other Google / Android TV boxes). I verified all access settings for the Wireguard and file managers apps which seem to be correct.

I also tried several file managers but Wireguard is unable to get access to any other (file manager) app (->no pop-up asking which file manager or tool to use). Instead Wireguard hangs for a while, crashes in the background and I'm back on the home screen. 

So there is definitely quite a bug behind. I hope Google will fix that soon, a second generation shouldn't be worse than the first one 🙂

ByronP
Community Specialist
Community Specialist

Hi gsa123 ,

 

Thank you for posting in the community. I understand that you're having troubles with your Google TV Streamer (4K) using WireGuard VPN. I really appreciate your effort to troubleshoot the situation. Let's work together to find a solution.

 

We are always looking for improvements. Please share your feedback so it can address this concern in future updates.

 

Let me know if you have any further questions.

 

Regards,

 

Byron

gsa123
Community Member

Hi Byron

Thanks for contacting me. As mentioned it ONLY happens on the Google TV Streamer while it works flawlessly on all Google TV 4k Chromecast I own. Together with Wireguard I usually use FileManager+ on the Google TV 4k Chromecast or Android Boxes where as said it works.

On Google TV Streamer I have the latest Build / Firmware version at the point in time, which is 

UTT3.240625.001.K5

I don't know what other information I'd need to add here to be helpful.

Regards,

Gsa123

Dan_The_Man
Community Member

Does file picker for android 14 require a receiver entry now in AndroidManifest.xml?

DV178020
Community Member

Having the exact same issue on Google TV Streamer. Worked previously on Chromecast with Google TV 4k.

Dan_The_Man
Community Member

Even flutter's file_picker fails on this device going into a loop crashing apps.