The magnet I used inside was about 2.5 x .5 in. I cut it in half and the
sleeve is tight enough to hold them. You could also put a dab of silicon
cement on them. A round magnet might be easier. If the magnet is strong
enough, it may just stick to a s...
This is a solution I found several years ago. The sleeves are still
available. I use 7 of the outdoor cams so replacement would be
expensive. Google should offer them as a accessory. The fact that they
come off the camera is almost a design flaw. Too...
There is a simple solution. Amazon sells silicone boots for the outdoor
cam. Also small powerful magnets. Put a magnet in the bottom of the boot
and then slide it on the camera. It will do a good job of holding the
camera in place. Search on Google f...
There is a solution to the missing camera magnet, Amazon sells a
silicone boot for the outdoor cam. They also sell small powerful
magnets. I have magnets that are about 3 in long to hold my heater vents
open. I cut one in half and placed the pieces a...