I have installed the power connector and I believe it is correct. The
thermostat worked for about 13 hours and now doesn’t have power. I am
connecting to a Taco sr503 3 zone switching relay. please advise
@Patrick_Caezza I really appreciate your help! So just to confirm you
are saying that the power connector won't work (it worked for a few
hours but it didn't have enough power) so I need to buy an external
transformer? Would you mind recommending whi...
@Patrick_Caezza so you’re saying you don’t think it will work with just
the power connector and I need to buy a resistor? this is getting wild
but I appreciate your help very much
@Patrick_Caezza I originally had it in the white wire. It worked for 12
hours and then stopped. This morning I switched it to the red wire just
for **bleep**s and giggles and it did not fix it. Google is sending me a
new power connector as they suspe...
@Patrick_Caezza do you mean wrap it around the orange thing sticking
out? There isn't a port there. Right now, the C wire from the power
connector is is in the white input (with the white cord that was already
there) in the green box labeled 24VAC. B...
I removed the red and white from zone 1, which is where the new
thermostat is and connected them with the clips to the grey red and
white on the power connector. I then connected the white cords labeled r
and w from the power connector into where th...
