12-27-2022 01:05 PM
I am having the siding on my house replaced so I decided to also replace my existing floodlight and Nest camera (separate from light) with the Nest Cam Floodlight. There is no junction box for the current light and my contractor said I should just screw the Nest mounting plate to the Hardie Plank siding (he is not an electrician). Can I do this or do I need to install a junction box like the instructions say?
Answered! Go to the Recommended Answer.
12-28-2022 07:08 AM
Thanks @spetro. I spoke to my electrician and he is coming to recess a pancake box into the Azek trim that was put where the light will go.
12-28-2022 07:04 AM
Use a junction box and follow county code. Can the guy giving you free advise on how to burn your house down.
12-28-2022 07:08 AM
Thanks @spetro. I spoke to my electrician and he is coming to recess a pancake box into the Azek trim that was put where the light will go.
01-03-2023 11:42 AM
Hi there,
Just checking in to see how the conversation is going. It looks like you may have found a solution already. Please let us know if you have any further questions or concerns.
Best regards,
Brad
01-06-2023 01:41 PM
Hi there,
Just checking in on this thread and the activity on it. We'll leave this topic open for another 24 hours in case there are any follow-up questions or comments.
Best regards,
Brad