06-14-2023 01:24 PM
I contacted EERO they don't know why its not working
I have a existing Nest Indoor Camera, I’m trying to add to my existing Nest network. When I go through the setup process in the Google Home app, it starts looking for a device to assist with set up. After trying for a few minutes, it times out and aborts set up with C103 error.
I have 7 nest cameras already set up and operating on this same account.
Need advice asap!!!
06-19-2023 03:49 PM
Hello postfacility,
Thanks for reaching out here in the Community. We appreciate you sharing here the error code you're getting. To confirm, do you still remember your first Nest device you set up on your account?
Give these steps a try:
On a computer
On a phone
3. Make sure your phone’s Wi-Fi is turned on, and that it’s connected to the same Wi-Fi network.
4. Make sure you’re not trying to connect a 2.4 GHz-only camera to a 5 GHz network.
5. Use the instructions in this article to restart your camera.
6. Open your app again and set up your Nest Camera on your phone.
Hit this link for more information and let us know how it goes.
Regards,
Emerson
06-22-2023 09:11 AM
Hey postfacility,
I'm dropping by to ensure that everything is covered here. How's it going with your Nest Camera? We would appreciate it if you could share the information I’m asking above. Also, were you able to perform the steps I’m suggesting? We'd be glad to hear from you.
Thanks,
Emerson
06-23-2023 09:13 AM
Hi postfacility,
Just one final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, we would be happy to keep it open. If there's more we can do, just let us know.
Best,
Emerson