07-11-2022 03:58 PM
Hi
first , in the product label there is no longer the option for doorbell (wired)
When I installed my nest doorbell (wired), it was sending notifications to my iPhone.
Some months ago, it stopped sending them.
I follow instructions from other posts with no success.
I've checked all the notifications options, in the Nest app, in iPhone settings, and in google home|
I've deleted and reinstalled the google home app.
I've reset the doorbell to factory settings.
I found no solution to this issue.
Could you help me?
Answered! Go to the Recommended Answer.
07-11-2022 05:06 PM
I've chatted with Google Support. the issue was with my Do Not Disturb mode. it was on.
07-11-2022 04:15 PM
This is a customer forum, so you'll get suggestions mostly from other customers.
I'm probably repeating the obvious, and you have probably done this already, but if you have the Google Nest Hello Doorbell, make sure that, under Settings | Notifications for the doorbell in the Google Nest app, "Notification type" is set to "Push notification" and "When to send" is set to "Always" (unless you only want notifications when you're away) to send notifications to your iPhone, and under Settings, "Visitor notifications" is turned on to send visitor announcements to your Google speakers. You also need to have selected at last one notification type (People, Packages, All Other Motion).
If you have the Google Nest Doorbell (Battery) wired to your chime, I don't know.
07-11-2022 04:56 PM
Hi thanks for your prompt response.
I did all those steps.
except for visitor notification, which is not on and the speaker is working. the iPhone notifications are still not working.
07-11-2022 05:06 PM
I've chatted with Google Support. the issue was with my Do Not Disturb mode. it was on.
07-15-2022 09:05 AM
Hi there,
Just checking in to see how the conversation is going as there's been a lapse in activity on this thread.
Best regard,
Brad
07-15-2022 09:33 AM
it's solved. you can close this.
07-15-2022 09:35 AM
Thank you for letting me know! Ill go ahead and lock and close this thread and mark it as resolved.
Best regards,
Brad