11-23-2021 09:02 PM
When installing my new Nest Doorbell (battery), I lost one of the wedge screws (that attaches the backplate to the wedge) and cannot find it. I need a replacement. Does anyone know the size of the screw so I can find one at a hardware store?
11-29-2021 12:13 PM - edited 12-07-2021 03:33 PM
Hey there,
Nest Doorbell (battery) comes with the video doorbell, base plate, release tool, 2 wall anchors, 2 wall screws, a wire connector, 20° wedge, 2 spacers, 2 wedge screws, a USB-C to USB-A charging cable (3 ft), quick start guide, and safety and warranty document.
Best Regards,
Brad.
11-30-2021 11:43 AM
I am also missing a wedge screw I would like to know the size for how to get a replacement
12-07-2021 12:08 PM
Hello, I'm in the same predicament. I misplaced the wedge screws. What size are they so I can get a couple at the hardware store. Thank you
12-07-2021 03:33 PM
Hi there,
I see some of you have helped them out which is great! I am glad that you found what you needed. I am not able to replace screws. Just checking in to see if you still need assistance with this issue. If so, please let me know and I would love to look into this further for you!
Best Regards,
Brad.
12-07-2021 12:19 PM
Hello, did you find the size of the wedge screw? I'm in the same situation as you (were?)
12-07-2021 12:21 PM
I haven't tried it yet to validate, but another user posted on another thread. I plan to try these:
"Hello, I didn’t get much help from google. But we managed to get some screws which were M3 x L12mm they were slightly long but they managed to fit as there was a slight gap."
12-07-2021 02:56 PM
Thank you!
12-09-2021 10:04 AM
Hey Folks.
At this time, I'll go ahead and lock this thread. If you're still experiencing problems, feel free to start a new thread and we'll be happy to help.
Best Regards,
Brad.