cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Nest outdoor 1set generation

Ron13
Community Member

Hi have a first gen outdoor camera and I have tried everything to get them working. 
ar first when the power goes out they never come back online and have to unplug the usb and wait 10 seconds and reconnect and it work. 
Now not even that works anymore. 

The device continually times out when I try to access it, or becomes unreachable.

I've tried fixing this using the following:

  1. Rebooting the main wifi router, and the extender.
  2. Changing the wifi channels
  3. Splitting 2.4ghz and 5ghz into different SSID
  4. Completely deleting the camera from my nest account and setting it up again (this works, but the camera setup doesn't fully complete, as it cannot be previewed).
  5. Connecting it to the main wifi router.
  6. Disconnecting the camera from power for 10 minutes and reconnecting the power.

None of this has worked.

 

would love some advise how to get it going. 

 

5 REPLIES 5

Brad
Community Specialist
Community Specialist

Hi there, 

 

I apologize for my late response and thank you for all of your patience while waiting for a reply. I definitely understand how frustrating your situation must be, and I wanted to make sure that your concern was acknowledged. Do you still need help with this issue?

 

Best Regards, 

Brad.

Ron13
Community Member

Hi brad 

 

yes the issues is still there. Would love some assistance. 

Brad
Community Specialist
Community Specialist

@Ron13

 

It sounds like the device is faulty or something. Have you contacted Support about this?

 

Best regards,

Brad

Brad
Community Specialist
Community Specialist

Hi there,

 

Just checking in to see how the conversation is going as there's been a lapse in activity on this thread. 

 

Best Regards,

Brad

Brad
Community Specialist
Community Specialist

Hi there,

 

Just checking in to see if you still need assistance with this issue.  We'll leave this topic open for another 24 hrs in case there are any follow up questions or comments.


Best regards,

Brad