06-10-2022 12:18 PM
I lost one of the small screws that are used to attach a power wire to the nest hello doorbell, Google support was not able to assist... and suggestions?
06-10-2022 02:38 PM
All I can think to do is head to the nearest hardware store with the doorbell and the (1) screw you have and see if you can buy one that works.
06-11-2022 05:35 AM
Unfortunately parts for these cameras is non-existent from Google direct. Although for screws, you may luck out spending some time in the nuts and bolts section of your local hardware store. I believe the screws are M3x4mm with a 7mm diameter head. However you could also probably do just M3x4mm and use a washer.
06-14-2022 03:38 PM
Hey sumit0836,
Appreciate the help, EmptyNester and Rubes. I'm dropping by to ensure if everything is covered here. Hope that sheds some light on the issue.
Thanks,
Archie
06-15-2022 03:40 PM
Hey sumit0836,
I just wanted to follow up and see if you're still in need of help. Please let us know as we would be happy to answer any questions you may have.
Thanks,
Archie
06-16-2022 04:21 PM
Hey sumit0836,
Just checking in to make sure that you've seen our responses. Please let me know if you have other questions or concerns as I will be locking this in 24 hours if I won't hear back from you again. Feel free to start a new thread and we'll be happy to help.
Thanks,
Archie