09-03-2022 05:14 PM
We moved into a new place and it comes with an already installed Nest Cam Outdoor IQ. Since it's been installed on the outside with the cable running through the outdoor wall that's been pinned in place, it's not possible to access the qr code on the inside of the plate. I can just barely make it out, but there's no room to get a phone camera in there to snap a pic of the barcode, and no way to read the digits either. Any suggestions?
09-03-2022 07:00 PM
You are supposed to be able to use the hex key that came with the camera to remove it from the mounting plate, by inserting it in the small hole at the top of the plate and turning it counterclockwise, as shown in the install video starting at about 6:55. The hex key is a 2.5 MM (3/32") hex key, as shown here:
https://support.google.com/googlenest/answer/9252289?hl=en-SG#zippy=%2Cnest-cam-iq-outdoor
You can disconnect the cable from the camera as shown at about 5:25 in the video:
https://support.google.com/googlenest/answer/9223210?hl=en#zippy=%2Cwatch-a-video-overview
The previous owner or resident needs to remove the camera from their Google Nest app (or Google Nest will give you an error that it's connected to another account. It then needs to be factory reset: https://support.google.com/googlenest/answer/9252289?hl=en-SG#zippy=%2Cnest-cam-iq-outdoor
09-05-2022 08:44 PM
Hey npkadaba,
I'm dropping by to ensure that everything is covered here. I hope that sheds some light on the issue.
I appreciate the help, MplsCustomer.
Thanks,
Archie
09-08-2022 10:49 PM
Hey npkadaba,
I just wanted to follow up to see if you still need our help. Please let us know as we would be happy to answer any questions you may have.
Thanks,
Archie
09-14-2022 09:58 PM
Hey there,
Just checking in to make sure that you've seen our responses. Please let me know if you have other questions or concerns as I will be locking this in 24 hours if I won't hear back from you again. Feel free to start a new thread and we'll be happy to help.
Thanks,
Archie