Configuring WIFI

[bjmeneely]

I have installed Nest learning thermostats in multiple building at our church. I have connected to the thermostats in 3 of the buildings. But they are all on the same home. How do I associate them with proper buildings? We also have separate WIFE in each building. I currently have 5 in bldg1, 1 in building 2 and 1 in bldg 4. They all show up in both Nest and Home apps.

[Anonymous]

You have to create a new home for each of the thermostats. To create a home.
From nest app main page>look for 3 bars icon on top left corner or arrow facing down icon from top left corner>then look for + icon on right side. Then, you can see the create home. For more information kindly refer to this link: Manage homes and products in the Nest app

[bjmeneely]

I created the first Home, "Lpbldg1" and then "Bldg2", and "Bldge" 4. But when I add new thermostats, they are all under the first account. Is thee a way to more them from one Home to another?

[Anonymous]

Remove the other two first since they're in the same home so that you can connect the 2nd to Bldg2, then 3rd to Bldg4.

[janthadeus]

Hey folks,

That’s great! As we got our resolution here, I'm going to mark this thread as resolved. I'll be locking this thread if we won't hear back from you again in 24 hours. Should that happen, feel free to create a new one if you have more questions or have other concerns in the future.

Thanks for the help here, eveluna, Jake and Mark.

Best,

JT

[bjmeneely]

Do you mean remove the thermostats? I reset the thermostat in bldg4 and then reinstalled it. I was on bldg4 when I reinstalled it, but it still showed up on bldg1.

[Anonymous]

Remove the other thermostats on the Blg1 that are that on blg1, then switch home, add 2nd thermostat to blg2 home, then switch home to blg4, add the 3rd one to blg4. You will only need to use nest app for nest learning thermostats.

[bjmeneely]

Forgot to add, I am using both the Nest app and the Google Home app.

[Jake]

Hey there,

Thank you so much eveluna for the help.

I wanted to check in and see if you managed to see eveluna's post. Please let me know if you have any questions from here. I would be happy to assist, and make sure you are good to go.

Best regards,
Jake

[Jake]

Hey there,

I wanted to check in and see if you are still in need of any help. Please let me know, as I would be happy to assist, and answer any questions you may have.

Best regards,
Jake

[Markjosephp]

Hello folks,

Thanks for assisting, Jake.

@bjmeneely, It has been a few days since your last reply, and I am going to lock the thread in 24 hours. If you have any questions, please feel free to create a new post.

Best,

Mark

[bjmeneely]

I think its taken care of for now, thanks.