09-25-2021 09:19 PM
When in Heat -Cooling Mode I use to be able to set either of those temperature to whatever I wanted. Now if I set the heat temperature and get within 3 degrees of cooling it increases that cooling temperature and vise versa from cooling to heat.
Answered! Go to the Recommended Answer.
09-26-2021 10:17 PM
Guessing I figured it out on my own. The 3 degrees is a default. Woke up yesterday morning to see that when setting up my thermostat via support it also set my schedule. So after waking up to see my temperature change I decided to go to you tube for support. Was far better information than calling tech support. At least on this issue.
09-26-2021 10:17 PM
Guessing I figured it out on my own. The 3 degrees is a default. Woke up yesterday morning to see that when setting up my thermostat via support it also set my schedule. So after waking up to see my temperature change I decided to go to you tube for support. Was far better information than calling tech support. At least on this issue.
10-26-2021 01:27 PM
Hey Ranmin7,
Glad to hear everything worked out, and the issue is resolved. With that being the case, I am going to lock the thread at this time. Please feel free to create a new post at any time if you have any questions from here.
Best regards,
Jake