11-30-2022 10:17 AM
Recently installed Nest learning Tstat. Before I add additional sensors, I’m trying to get all bugs on main unit correct. The humidity has read 100% since install. How long should it take for internal sensor to read correctly? My house has a whole home dehumidifier with separate wall controls that read properly. I just want all to be in synch.
12-03-2022 12:45 PM
Anybody??
12-06-2022 12:18 PM
Hey there,
Sorry for the late reply. I wanted to follow up and see if I could be of any help. I found an article with more details that could be of help. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.
Best regards,
Jake
12-09-2022 10:30 AM
Hey there,
I wanted to check in and see if you are still in need of any help. Please let me know, as I would be happy to assist, and answer any questions you may have.
Best regards,
Jake
12-09-2022 07:57 PM
The tstat is working fine but the humidity reading is still 100%. The dehumidifier is not connected since the nest is reading way off.
12-25-2022 11:17 AM
Hello folks,
I wanted to stop by and see how I could help.
Thanks for helping, Jake.
@Spartacus79, I'd be happy to take a look into this for you. To isolate:
I'll look forward to your response.
Regards,
Mark
12-28-2022 01:55 PM
Hello Spartacus79,
I wanted to see if you still needed help. Please let us know if you have any other questions or concerns.
Thanks,
Mark
12-29-2022 02:00 PM
Hi Spartacus79,
I'm checking in to make sure that you've seen my response. Please let us know if you have any additional questions or concerns before we lock this thread in 24 hours.
Thanks,
Mark