Nest Compatible

[Skyeline]

Do you think it can take a NEST? There is a piece of metal that is connecting RH,

 

R & RC together. And then a resister that connects them all to W1 (the red thing) 😵‍💫🫣🤔

[EdwardT]

Hi Skyeline,

Thanks for reaching out. The wiring looks like it would work with all the models of the Nest Thermostat. You don't need to use the jumper wires as the Nest Thermostat does this internally. You can also click on this link to learn more about this.

Thanks,

Edward

[Jhonleanmel]

Hey folks, 

We appreciate your help here, EdwardT.
Skyeline, I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any concerns or questions from here, as I would be happy to take a closer look and assist you further.

Thanks,
Mel

[Jhonleanmel]

Hi everyone,

I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this thread after 24 hours.

Thanks,
Mel

[Skyeline]

Edwards Responce was helpful… but it only addressed the jumper clip between RH, R, and RC, but not the resister that then connects those three to the W1 wire. Can I delete the resister? 

[EdwardT]

Hi Skyeline,

Thanks for the response. You don't also need to use the resistor. Let us know once you've installed the Nest Thermostat. Keep us posted.

Thanks,

Edward

[Jhonleanmel]

Hi folks,

Chiming in to see if you still need assistance with this. Let us know if you have additional questions ― we'd love to help.

Best,
Mel

[Jhonleanmel]

Hi everyone,

Just one quick final check in here since activity has slowed down. We haven't heard from you in a while so we'll be locking this thread if there is no update after 24 hours. If you have any new questions, updates or just a discussion topic, feel free to start a new thread in the Community.

Thanks,
Mel