cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Nest Thermo Learning not working correctly!

Dawanna803
Community Member

5CEC0485-BCD7-4427-BCC2-BC82EE87EC38.jpeg

E497561D-FD56-43F2-BBE8-B24A70748EED.jpeg

good evening!!

in looking at my wiring it appears I have wires that are not accurate. Attached are pictures of my old and current set up. 

Can someone please assist?

 

thank you!!

1 Recommended Answer

Houptee
Silver Product Expert
Silver Product Expert

Move the red wire to the Rc plug and try again to go thru set up.

Nest should work with this system it uses standard wiring.


Houptee -- NJ Master HVAC Licensed Contractor

View Recommended Answer in original post

8 REPLIES 8

Houptee
Silver Product Expert
Silver Product Expert

The pics are too small.

What kind of system do you have?

Is this a heat pump with AC sytem?

I cannot see the wire terminals clearly on the right side of the old t-stat and cannot see the Nest screen either.

 


Houptee -- NJ Master HVAC Licensed Contractor

Hello. 

it is a heat pump and ac unit by carrier. It’s only 2 years old but old house. 

15B3691F-EA4E-4B2E-AD73-37684F19E724.jpeg

EF5E369B-8954-4010-9A5A-427C5E13C52B.jpeg

 hope these pictures are better!!

 

Thank you again for helping me!!

Houptee
Silver Product Expert
Silver Product Expert

Move the red wire to the Rc plug and try again to go thru set up.

Nest should work with this system it uses standard wiring.


Houptee -- NJ Master HVAC Licensed Contractor

YAYYYY!!!! That did the trick!!!!

Thank you sooo very much as this has saved me so much money!!!

You have yourself a blessed day and week.

Stay safe, Dawn

Jeran
Community Specialist
Community Specialist

Hiya Dawanna803,

 

I'm glad to see that Houptee was able to help you out! In that case, did you have any more questions that we can address?

 

Best regards,

Jeran

Jake
Community Specialist
Community Specialist

Hey Dawanna803,


I wanted to check in, and let you know that I will be locking the thread in 24 hours.

 

Best regards,

Jake

EdwardT
Community Specialist
Community Specialist

Hi Dawanna803,

 

I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.

 

Thanks,

Edward