10-04-2022 07:32 PM - edited 10-04-2022 07:35 PM
good evening!!
in looking at my wiring it appears I have wires that are not accurate. Attached are pictures of my old and current set up.
Can someone please assist?
thank you!!
Answered! Go to the Recommended Answer.
10-05-2022 11:48 AM
Move the red wire to the Rc plug and try again to go thru set up.
Nest should work with this system it uses standard wiring.
10-04-2022 07:56 PM
The pics are too small.
What kind of system do you have?
Is this a heat pump with AC sytem?
I cannot see the wire terminals clearly on the right side of the old t-stat and cannot see the Nest screen either.
10-05-2022 09:38 AM
Hello.
it is a heat pump and ac unit by carrier. It’s only 2 years old but old house.
10-05-2022 09:41 AM
hope these pictures are better!!
Thank you again for helping me!!
10-05-2022 11:48 AM
Move the red wire to the Rc plug and try again to go thru set up.
Nest should work with this system it uses standard wiring.
10-05-2022 01:20 PM
YAYYYY!!!! That did the trick!!!!
Thank you sooo very much as this has saved me so much money!!!
You have yourself a blessed day and week.
Stay safe, Dawn
10-05-2022 02:39 PM
Hiya Dawanna803,
I'm glad to see that Houptee was able to help you out! In that case, did you have any more questions that we can address?
Best regards,
Jeran
10-10-2022 10:28 AM
Hey Dawanna803,
I wanted to check in, and let you know that I will be locking the thread in 24 hours.
Best regards,
Jake
10-08-2022 03:21 PM
Hi Dawanna803,
I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.
Thanks,
Edward