Nest Thermostat not blowing cold air only warm

[randibailey77]

Hello,

I installed my nest Learning thermostat 2 nights ago, I ended up blowing a fuse and replaced the fuse and everything turned on and I thought we were good to go. Now my house continuously is getting hotter and hotter when I have the mode set to cool and 70 degrees. But now it is at 87. Here is my old wiring. my nest wiring is G, Y1, W1, C, RC.

Any help is appreciated

[Houptee]

On the Nest go to settings and check the power info. It shows Vin Lin etc.

If no power in Vin you might have blown your fuse again.

Also you never used jumper wires on the nest so if you put one from Rh to Rc remove it.

[zoeuvre]

Hi randibailey77,

I wanted to check and see if you managed to see the information that Houptee shared. Please let me know if you have any questions from here. I would be happy to assist and make sure you are good to go.

Thanks for your help, @Houptee.

Best, 

Zoe 

[zoeuvre]

Hey there,

Before I mark things as resolved, I wanted to check and see if there might be anything else you needed on this or to see if you had any other questions. If there's more you need, just let us know.

Thanks,

Zoe

[EmersonB]

Hello everyone,

@randibailey77, just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, we would be happy to keep it open. If there's more we can do, just let us know.

I appreciate the help, Zoe and Houptee.

Regards,
Emerson