01-06-2023 03:10 PM
I installed a Nest thermostat my customer supplied, it looked new, but as soon as I put my wire in the Y1 terminal it would start the AC system. I double checked the wiring, everything was fine. It's a simple 1 heat/1 cool system. I put the old stat back on and the system worked fine. Just curious if anyone else has experienced this with resolve, or if we just have a bad subbase.
01-06-2023 07:21 PM
If this is a Nest Learning Thermostat 2nd or 3rd generation, this might of happened when if the power was not turned off before installing the base and attaching the thermostat conductors. The backplate has discrete electronics on it that can be damaged with a static charge.
If as you say the backplate connects the R to Y without the display attached, then the backplate must be replaced as it is damaged. Have your customer contact Google and have it replaced for free since it is within the first 30-days of ownership.
Ken, The AC Cooling Wizard
01-09-2023 09:15 AM
Hey folks,
We appreciate your help here, CoolingWizard.
MattinOhio, I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any concerns or questions from here, as I would be happy to take a closer look and assist you further.
Thanks,
Mel
01-12-2023 11:28 AM
Hey there,
Checking back in should you still have some questions here. Let us know by replying to this thread.
Best,
Mel
01-13-2023 12:30 PM
Hi everyone,
I'm just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this thread after 24 hours.
Thanks,
Mel