04-08-2023 07:55 AM
How do I wire Trane gas pack ( or heat pump) based on my wiring picture? When I wire based on like for like characters Nest says I have a dual heat system which I don’t. Thanks.
.
04-08-2023 08:00 AM
Currently wired which isn’t working.
04-08-2023 11:03 AM
Resolved the wiring issue - moved blue wire to C. AC works and the heat run in testing mode. Now the heat will not run - 2 stage heat when I adjust temperature. It was detected and configured. Tried the pro setup and selected activate fan settings - issues is sporadic. I also updated the firmware. Ready to return.
04-08-2023 04:05 PM
Something to consider... On the old thermostat you will see it has two sets of wiring letters. The inner letters are used if the thermostat is controlling a traditional furnace and AC unit. The outer letters are for a heat pump. So it is possible the correct working is brown to O/B, black to W1 and Blue to C. You would probably need to reset the wiring on the thermostat.
04-08-2023 04:18 PM
Thanks for your advice. I found another posting to move blue to C. We have a two stage gas pack. If I test the heat it works but doesn’t heat in normal mode. I have tried the pro setup - select activate fan. Not sure what to do now. I reinstalled my old thermostat = that works.
04-12-2023 07:04 AM
04-17-2023 10:08 AM
Hi folks,
Chiming in — do you see any messages or code on your Nest Thermostat screen? Could you please go to your thermostat Settings and look for Equipment and check for a wiring diagram?
I appreciate your help, @sporfrog and Zoe.
Thanks,
Jenelyn
04-18-2023 10:13 AM
Hi RustyF,
We haven't heard from you in a while so we'll be locking this thread if there is no update within 24 hours. If you need assistance or want to discuss topics, feel free to start a new thread.
Regards,
Jenelyn