Wiring Heat and AC, N72 error and Blower issue

[spectorcam]

When the Rh and W are connected alone, the heat is fine and I have Rh power. Once I connect the Rc, Y, and G, the air conditioner works fine, but I get an N72 power issue on the Rh and the blower fan from the air conditioner comes on when the heater comes on. If I remove the Rc, Y, and G again, then the heat works fine and no N72 issue. Any thoughts?

[spectorcam]

So the blower was because the wrong equipment was selected, but I still have this issue. This is what I determined, when Y is connected, I show Rc power but no Rh power. If I disconnect the yellow, then Rc Power is good and Rh Power disappears the system is working normally though

[Ryan_G]

Hey spectorcam,

Thanks for reaching out and we're sorry for the delay.

It's great to see that you were able to move some wires and further isolate the issue. Just to check, do you have a common wire connected to your system?

Best regards,

Ryan

[Ryan_G]

Hey spectorcam,

I just wanted to follow up and see if you're still in need of help? Please let me know, as I would be happy to answer any questions you may have.

Best regards,

Ryan

[Ryan_G]

Hey there,

Just wanted to jump in here to check to make sure that you saw our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.

Have a great day.

Best regards,

Ryan

[Ryan_G]

Hey folks,

Thanks for visiting the Google Nest Community. 

Since this thread hasn't had activity in a while, we're going to close it to keep content fresh.

If you have additional questions, feel free to submit another post and provide as many details as possible so that others can lend a hand. 

Hope this helps!

Kind regards,

Ryan