cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

Wiring nest to a TACO SR-503 zone board

kanto501
Community Member

I'm trying to install a nest 3 to zone 1 of the Taco board as a replacement for a failed Honeywell programmable thermostat. The old thermostat had just a red and white wire connected with the white to the white terminal and the red to the Rh and a jumper from Rh to Rc.

Now these 2 wired to to the zone 1 connections on the taco. I have a blue wire I can use for the C wire but I'm not sure where to put it on the taco board. I do see a 2 terminal 24VDC block with one terminal listed as com. Is that where it should be hooked up to or am I way off. I'll attach a pix of the taco.

Taco SR-503Taco SR-503

1 Recommended Answer

kanto501
Community Member

I solved this by finding another post titled something like C wire hookup to taco box. In that thread it says you should hook your C wire from the C terminal of the nest(Blue wire normally) to the COM connection in the taco box. This is found in the upper left of the board. You will find 2 terminal connections. The top says 24VAC and the bottom says COM. Just hook your blue wire to the COM terminal and now all is good.

View Recommended Answer in original post

15 REPLIES 15

kanto501
Community Member

I solved this by finding another post titled something like C wire hookup to taco box. In that thread it says you should hook your C wire from the C terminal of the nest(Blue wire normally) to the COM connection in the taco box. This is found in the upper left of the board. You will find 2 terminal connections. The top says 24VAC and the bottom says COM. Just hook your blue wire to the COM terminal and now all is good.

MelbaDT
Community Specialist
Community Specialist

Hey kanto501, 

 

Thanks for posting and for keeping us in the loop on what you've done to have your concern rectified — give yourself a pat on the back for a job well done!

 

Feel free to let us know if you have more questions in mind. 

 

Cheers, 

Melba

aatienza
Community Specialist
Community Specialist

Hey kanto501,

 

Chiming in to check if you have additional questions or concerns as we will be locking this thread within 24 hours. 

 

Let us know so we can assist you right away.


Thanks,

Archie

JayToomey
Community Member

Does anyone know if you can hook multiple C connectors to the one com location?

Markjosephp
Community Specialist
Community Specialist

Hello JayToomey,

 

Thanks for reaching out. Let me take a closer look your HVAC systems configuration.

 

A few questions: do you have multiple Nest Thermostats connected to the same HVAC system? Also, are you having any power issues? Here's a link that might help.

 

I'll look forward for your response.

 

Thanks,

Mark

EdwardT
Community Specialist
Community Specialist

Hi  JayToomey,

 

I wanted to follow up and see if you are still in need of any help. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.

 

Thanks,

Edward

Hello! Thank you both. Yes, I still need help. I’ve got a 2 zone house with 2 Nests. One zone is hooked up to the “com” with the power cable. I still need to install the second power cable for the other zone. Please see attached picture. Thank you!

 

 

8DF711EA-E440-457F-99F3-A92C38C35495.jpeg

 picture above 

EdwardT
Community Specialist
Community Specialist

Hi JayToomey,

 

Thanks for the update. We'd like to know more about this. Please fill out this form so we could investigate further.

 

Thanks,

Edward

EdwardT
Community Specialist
Community Specialist

Hi JayToomey,

 

I'm checking back in. Were you able to fill out the form? Let us know if you have questions and we'd be glad to assist you.

 

Thanks,

Edward

Yes, I filled it out 

EdwardT
Community Specialist
Community Specialist

Hi JayToomey,

 

Thanks for the response. I can't seem to find your form. Could you try filling it out again and include the link of this thread?

 

Thanks<

Edward

EdwardT
Community Specialist
Community Specialist

Hi JayToomey,

 

It's me again. Please fill out the form again and make sure that you include the link of this thread and the username that you're using.

 

Thanks,

Edwrd

JayToomey
Community Member

Hi, I submitted that about 3-4 hours ago 

EdwardT
Community Specialist
Community Specialist

Hi JayToomey,

 

Thanks for the update. We got your form — thanks for filling it out. Our team will reach out to you via email to further assist you. Also, please be advised that this thread will be locked after 24 hours.

 

Thanks,

Edward