04-21-2022 01:48 PM
I have a basic Honeywell heat pump system with emergency electric heat. It is wired Red/R, White/Aux, Yellow/Y, Green/G, Orange/O, Lightblue/B. The last two I understand are for switching between cooling/heating modes. There is no C as on the Nest.
This is a fairly old Frigidare system with nothing special about it. Can anyone advise how the wiring should be. What is the C for?
Thanks
04-21-2022 09:20 PM
Post a picture of the wiring on the original thermostat.
04-24-2022 06:41 AM
Sorry, this system doesn't seem to allow a link to my photos, but there is nothing it can add to what I described.
04-27-2022 02:16 PM
Hi folks,
@Patrick_Caezza, thanks for the help!
@ErikL, thanks for reaching out. Could you tell us the make and model of the current thermostat that you're using?
Looking forward to your response.
Thanks,
Edward
04-30-2022 04:24 PM
Hi ErikL,
It's me again. I wanted to check back in to see if you have other questions and concerns. Feel free to let me know if you do.
Thanks,
Edward
05-02-2022 02:32 PM
Hi ErikL,
Just checking in to make sure that you've seen our response. Please let us know if you have any other questions or concerns as I will be locking this in 24 hours.
Thanks,
Edward