cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

2 internet connection 1 Google wifi network

Amer
Community Member

Hello

I have the following scenario would like your help before I setup if it would work. 

I have a current setup of 4 Google WiFi spread around the house and working seamlessly.

Router (main Internet connection) - - - > Google wifi Puck #1 connected via ethernet - - - > distributed to the remaining Pucks via wifi coverage is excellent.

I have received a 2nd internet connection but I don't want to add a new network hence new Pucks can I possibly add the new connection to any of the remaining Pucks in the main network as following :

New router with Lan ip same as the main network connected via ethernet to one of the 3 remaining Pucks and use its IP as a gateway to channel traffic from certain devices through it? As a following example :

Device #1 gateway #1 traffic will flow through connection #1

Device # gateway #2 traffic will flow through connection #2

The reason more that I can't physically both connections near each other to group them in one MikroTik for example. One connection is available in the kitchen area and the other is coming in from the main balcony area and those areas are both distant from each other. 

Thank you 

5 Recommended AnswerS

MichaelP
Diamond Product Expert
Diamond Product Expert

Hello @Amer 

No, this is not a supported configuration. It would be difficult, if not impossible, for any system to meet these constraints, to be honest.

View Recommended Answer in original post

Jeff
Community Specialist
Community Specialist

Hi, Amer.
I just wanted to jump in real fast to see if you saw MichaelP's reply and to see if you still needed some help on this or if you were able to get it sorted out. If you are still needing some help, just let us know and we'll be happy to continue helping.
Thanks.

View Recommended Answer in original post

Jeff
Community Specialist
Community Specialist

Hey, Amer.

I'm just following up once more to see if you still needed some help here. If there's more we can do, just let us know.

Thanks.

View Recommended Answer in original post

Jeff
Community Specialist
Community Specialist

Hi, everyone.
Just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, I would be happy to keep it open. If there's more we can do, just let me know.
Thanks.

View Recommended Answer in original post

Jeff
Community Specialist
Community Specialist

Hi, everyone.
As we haven't had any activity here recently I'm going to go ahead and close the thread. If you have more to add, feel free to start a new discussion.
Thanks

View Recommended Answer in original post

5 REPLIES 5

MichaelP
Diamond Product Expert
Diamond Product Expert

Hello @Amer 

No, this is not a supported configuration. It would be difficult, if not impossible, for any system to meet these constraints, to be honest.

Jeff
Community Specialist
Community Specialist

Hi, Amer.
I just wanted to jump in real fast to see if you saw MichaelP's reply and to see if you still needed some help on this or if you were able to get it sorted out. If you are still needing some help, just let us know and we'll be happy to continue helping.
Thanks.

Jeff
Community Specialist
Community Specialist

Hey, Amer.

I'm just following up once more to see if you still needed some help here. If there's more we can do, just let us know.

Thanks.

Jeff
Community Specialist
Community Specialist

Hi, everyone.
Just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, I would be happy to keep it open. If there's more we can do, just let me know.
Thanks.

Jeff
Community Specialist
Community Specialist

Hi, everyone.
As we haven't had any activity here recently I'm going to go ahead and close the thread. If you have more to add, feel free to start a new discussion.
Thanks