11-20-2022 08:37 PM
I am having a difficult time getting my Nest Doorbell to reconnect. I noticed it wasn't working, so I brought it inside to troubleshoot. I ended up having to reset the device. Now I get a solid white light on the unit and when trying to add to the Home app it just says something went wrong. Everything else is connected in my house, just can't get the doorbell to work! Help
Answered! Go to the Recommended Answer.
11-28-2022 12:14 PM
Hey Brad
All good for now , everything is working as expected.
Bill
11-20-2022 09:13 PM
Hi , did you factory reset the device ? You put a paper clip or pin in through reset hole just below the plug for charging the battery. Hold it in until the yellow stops flashing, then remove it .Maybe before you do this remove from goggle home app . + device and follow prompt steps. If you have the code from the box it came in use that not the code Hub max shows on the screen , good luck my friend 👍
11-20-2022 09:15 PM
The code you want to use is on the blue piece of paper in the original box
11-25-2022 09:37 AM
Hey there,
Thank you for bringing up the concern you're experiencing, I would love to look into this further for you. The first troubleshooting step that I'd recommend would be to restart your device. This process should keep all your settings, and reconnect it to the same Wi-Fi network. This is helpful if it ever freezes, has connection problems, or isn't working normally.
Best regards,
Brad
11-28-2022 11:20 AM
Hi there,
Just checking in to see how the conversation is going. Please let us know if you have any further questions or concerns. We'll leave this thread open for a little longer for follow-up questions and concerns.
Best regards,
Brad
11-28-2022 12:14 PM
Hey Brad
All good for now , everything is working as expected.
Bill
11-29-2022 09:44 AM
I am relieved to hear that this is resolved for you! I will go ahead and leave this thread open for another 24 hours for follow-up questions and concerns.
Best regards,
Brad