02-24-2022 05:39 PM
I have generation 2 and 3 chromecast devices. I have no wifi in my house. All my chromecasts are working properly using ethernet cables. Even though there is no wifi in my house, these devices are still transmitting a wifi signal. How do I prevent them from transmitting wifi?
02-24-2022 11:23 PM
Hi Iou2,
What you are seeing is the devices going into a setup mode. This only happens when no internet connection is detected.
Regards,
Cathal
02-25-2022 08:25 AM
Thanks for responding Cathal. Just to clarify. I have 5 tvs. I'm watching youtube, using chromecast on all of them. So they all have internet through the ethernet cable that I control through my cellphone that is also using an ethernet cable because there is no wifi. It all works. Only problem is, even though they all have an internet connection, and they are all set up and working, they all still put out a constant wifi signal. And when I say wifi signal, I mean as measured with emf meter, not a wifi connection signal that I can connect to for setup. It's defiantly a wifi frequency, and very strong. I appreciate any insight you may have into allowing me to turn it off. My last resort will be to try a cellphone faraday pouch.
02-25-2022 08:41 AM
Hi again,
This is a community forum mainly supported by other users and community specialists so I would recommend speaking directly with a Google representative about this.
Contact:
https://support.google.com/googlenest/gethelp
Regards,
Cathal
02-25-2022 01:16 PM
I spoke with them. Thank you for their link. Apparently there is no current solution. I have asked the Home development team to add a feature to allow the ability to turn off all wifi communication from a chromecast device if it has internet access already using an ethernet cable.
02-25-2022 02:43 PM
Thanks for coming back and sharing Google's response.
03-02-2022 08:57 AM
Hi folks,
Thanks for the help, Cathal_S.
Thanks for keeping us in the loop, lou2. I just want to add info. The Chromecast devices must always be connected to the WiFi. Ethernet is only used to boost or improve the connection of the Chromecast. While the feature you are looking for isn't supported, you can also submit your feedback about your Chromecast via the Google Home app. Here's how.
Let us know if there's anything else.
Thanks,
Jennifer
03-03-2022 12:23 PM
I don't believe that is correct. I can and have set up my chromecast without being on a wifi network. I just set up the chromecast using an ethernet cable, never connecting to a wifi. I am currently using the chromecasts without any wifi in my house at all. I wrapped the chromecasts up in aluminum foil and now, using a RF meter, I can no longer detect a signal transmitting from the chromecast unless I'm right up on it. Perfect. 😉
05-05-2022 11:00 AM
Hey there lou2,
I know this response is long overdue, but did you have any more questions or need any additional help?
Best regards,
Jeran
05-06-2022 09:11 AM
Using a cellphone faraday pouch worked great. No need to disable them now
05-11-2022 08:27 AM
That is good to hear! In that case, I'll go ahead and lock up this thread. If you have any more questions or concerns in the future, please feel free to create a new thread.
Thank you for your help, Cathal and Jennifer!
Best regards,
Jeran