05-08-2022 06:29 AM
I installed a Nest Leaning Thermostat last week. We have had ac on since. Now we need heat. I have reset. And have changed from O to B still no heat. Photos to show factory, Nest. Any help would be great. Thanks.
05-08-2022 06:52 AM
this a closer pic
05-08-2022 07:28 AM
Your RED wire goes in Rh not in Rc.
05-08-2022 10:37 AM
That didn't do it either. Just putting Cpi back on. Mess with it when I find more info. Every way I had it should of worked.
05-08-2022 08:57 PM
It doesn't matter but the Rc terminal is preferred.
05-08-2022 09:04 PM
Give this a try
White - W to W2/AUX (set as AUX heat)
Yellow - Y to Y1
Green - G to G
Red - R to Rc (jumper to R not needed)
Blue - B to OB (you will have to change the valve setting)
Brown - C to C
Because your system uses the B wire for the reversing valve relay you have to change its setting.
05-11-2022 07:52 PM
Hey folks,
Thanks for your detailed responses as always, Patrick_Caezza.
Jconnell65, I'm chiming in to make sure everything is covered here. How's your thermostat now?
Best,
Melba
05-12-2022 02:27 AM
I haven't installed it back yet. I'm going to do it Saturday. And try Patrick's way. Thanks.
05-12-2022 06:45 PM
Hey there,
Gotcha — keep us posted after you've installed it. We wanted to ensure it will work as it should.
Cheers,
Melba
05-16-2022 07:29 PM
Hey Jconnell65,
Chiming in to check if you still need help with this?
Feel free to respond to this thread if you have additional questions or concerns and I'd be glad to answer it for you.
Thanks,
Archie
05-17-2022 05:00 AM
Still haven't put back up yet. Hopefully this week. Thanks
05-17-2022 05:27 PM
Hey Jconnell65,
Understood — let us know how it goes.
Thanks,
Archie
05-20-2022 11:10 PM
Hey Jconnell65,
How's it going? Still need our help? Feel free to let us know if you do.
I just wanted to follow up and see if you're still in need of help. Please let us know as we would be happy to answer any questions you may have.
Thanks,
Archie
06-01-2022 08:25 PM
Hey here,
We haven't heard from you in a while so we'll be locking this thread if there is no update within the day. If you have any new issues, updates or just a discussion topic, feel free to start a new thread in the community.
Best,
Melba