06-26-2022 12:22 AM
Hi,
we just got the nest learning thermostat, the one with the blue level
we were sure to make sure the wires are connected correctly,
we have Central AC and furnace heating.
The AC works well with the fan we don’t have any problems there however when we try to turn the heat on we can hear the furnace on but the fan isn’t blowing through the vents.
We had a white yellow green and red cable on our old thermostat and made sure this was compatible before installing.
any ideas on how to get this working?
08-15-2022 11:47 AM
Hey Eyecrudd93,
Sorry for the late reply. I wanted to follow up and see I could be of any help. I found an article with more details on fan control. Please let me know if you are still having any trouble from here, as I would be happy to take a closer look and assist you further.
Best regards,
Jake
08-18-2022 10:23 AM
Hey Eyecrudd93,
I wanted to check in and see if you are still in need of any help with your device. Please let me know, as I would be happy to assist, and answer any questions you may have.
Best regards,
Jake
08-19-2022 08:47 AM
Hey Eyecrudd93,
I want to ensure you are good to go, and everything is working properly. Please let me know if you are still having trouble, as I will be locking the thread in 24 hours due to inactivity.
Best regards,
Jake