11-20-2021 07:12 PM
How can you increase the minimum safety temperature beyond 7 degrees (Celsius)?
11-24-2021 05:17 AM
As far as I can tell there is no way. I don't know if this is a technical limitation of the electronics used (I would hope the safety temperature is set using some system that'll function even if the thermostat battery died, or the program was otherwise messed up).
But I agree that 7 is too low. If my thermostat (top floor) gets to 7 then my basement is probably below 0 at that point.
11-24-2021 05:41 AM
Thanks MildMastermind. Same situation here: 7 degrees upstairs could mean 0 or lower downstairs.
11-06-2022 01:57 PM
Exactly the same issue here. If my internal temp reaches 7C it means my furnace has failed since the low end of Eco mode is set at 16C. I need to receive a notification if my temp drops to 13C but it seems the only way to receive a notification is if Safety temp number is hit.... well by then it's too late. This seems so basic.
11-23-2022 09:43 AM
Hi PBM,
Thanks for reaching out, and I'm sorry for the delayed response.
We're always looking for ways to improve, and we appreciate your feedback. Notifications when the temperature exceeds the eco temperatures are yet to be available. Please share with us your feedback and let us know if you have more questions in mind.
Best regards,
Mark
11-26-2022 09:49 AM
Hello PBM,
I'm checking in to make sure that you've seen my response. Please let us know if you have any additional questions or concerns before I lock this thread in 24 hours.
Thanks,
Mark