01-14-2022 11:30 AM
Hi,
My Nest Heat link has stopped working - no lights. This is the second of three I bought 2 years ago to break. It's literally one day before the two warranty expires. There is 240 volts to the heat link. I know I've tested it. I tried clicking the button (5 seconds, 10 seconds) on the front. I've switch the power off and on again.
This is the exactly the same issue I had rough 6 months ago with the other Heat Link.
How do I get this fixed/replaced under warranty?
Thanks,
01-14-2022 07:05 PM
You need to contact Google on the official support site. This site is for user to user conversations.
https://support.google.com/googlenest/gethelpsupport.google.com
01-17-2022 03:39 AM
Hi there,
Thanks for reaching out. I'll do my best to get this sorted for you as soon as possible.
Could you also help me with some answers to these questions?
How long has your thermostat been installed for?
Did the issue happen during the installation?
Is there any error on the Nest thermostat display?
Have you had any power cuts recently?
Have you had any work done on your electrical or heating systems recently?
If yes, was the power properly restored at the fuse board after work was done?
How many zones ( thermostats ) are present in the setup?
01-17-2022 03:58 AM - edited 01-17-2022 03:58 AM
How long has your thermostat been installed for?
It was installed 15/01/2019 by a Nest specialist. It broke on the 14/01/2022, hence I raised an issue rightaway as it the last day of the two year warranty. I also filled in the form for help I found on another thread. If you look you should be able to find it.
Did the issue happen during the installation?
No.
Is there any error on the Nest thermostat display?
No. As there is no power coming from the Heat Link. If I swap the Nest display over with another it comes on but has no heat link to connect to as the heat link it is paired with is dead.
Have you had any power cuts recently?
No.
Have you had any work done on your electrical or heating systems recently?
No.
If yes, was the power properly restored at the fuse board after work was done?
I've checked the fusebox and the power to the heat link and it is good, it is 240 volts
How many zones ( thermostats ) are present in the setup?
There are 3 and the two others are good.
01-17-2022 04:13 AM
Thank you for all the info. To proceed I would like to create a case for you. Would it be ok if I reached out to you over the email you have associated with your forum account?
01-17-2022 04:22 AM
Yes. Please do.
01-17-2022 04:27 AM
I sent an email your way. Check to see if you received it and reply to it when you are able.
01-17-2022 04:33 AM
Thanks. Now filled out.
01-17-2022 05:01 AM
Hi there. I just sent you a follow up email.
01-20-2022 05:18 AM
Hello again. Since we've managed to resolve the issue over emails, I'm going to close this thread. Have a great day ahead!