11-22-2022 07:50 PM
Does the thermostat marry to the wiring base?
We replaced a learning thermostat body with a new one and it didn't work. It flashes green yellow-green, then announces "the thermostat is shutting down". And repeat. (We've already returned the old body). Is it that the wiring base is married to the other body, or just a chance that the new one is defective?
11-23-2022 06:44 AM
The display and the base are not a matched pair.
Looks like you may have a faulty part, and that could be the base if the display has been replaced..
11-23-2022 09:20 AM
Thank you. The original worked great, but circumstances required replacement. Looks like the new one was problematic.
11-29-2022 02:48 PM
Hi folks,
I wanted to stop by and see how I could help.
Thanks for helping here, @Frustratedddd.
@Elanam, it's usually normal for a newly installed part of the thermostat, especially for the display part to not power up. Let's sort this out.
You'll find the steps here on this page:
Please keep us posted on how it goes.
Best regards,
Mark
12-02-2022 03:00 PM
Hi Elanam,
I'm checking back in. Were you able to do the steps above? I'd be glad to hear from you — I'd like to make sure everything is working.
Thanks,
Mark
12-04-2022 01:56 PM
Hello Elanam,
I'm checking in to make sure that you've seen my response. Please let us know if you have any additional questions or concerns before we lock this thread in 24 hours.
Best,
Mark