Removing Display from Base

[mbespikee]

I need to tighten the screws that attach the base to the wall.  Therefore, I have to remove the display from the base.  The trouble is it won't budge, and I want to be careful not to rip the wires out by pulling too hard.

Is there a trick to this, or a certain place on the ring to squeeze, etc?

Sorry, but I'm just too old to still be very handy!  

[RXShorty · Accepted solution]

Hi @mbespikee 

You can remove it by holding it from the sides and then pull. Check this video. 😊

[Markjosephp]

Hi folks,

I'm just dropping by to see if I can help.

Thanks for the assistance, @RXShorty. The video link is a big help!

@mbespikee, I wanted to ensure you are good to go. Were able to detach your Nest thermostat display from its base? Please let us know if you have any other questions or concerns.

Thanks,

Mark

[EmersonB]

Hi everyone,

@mbespikee checking in to see if you still need assistance on this. Let me know if you have additional questions.

I appreciate your response, @mark and @RXShorty.

Regards,
Emerson

[Jhonleanmel]

Hi folks,

Just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, I would be happy to keep it open. If there's more we can do, just let me know.

Thanks,
Mel