Hello I have electric baseboard heat in my finished basement. There are 2 loads that pass thru a
24A06G-1 white rodgers Thermal Relay. The relay is controlled by a 2 wire thermostat. I was getting the "need a c-wire" error so I bought the power connector but don't know how to connect the C portion of the connector to the relay or my electical panel. any thoughts? there aren't any clear Basically 2 double pole breakers(4 wires come in to the relay and then 2 come out to the thermostat. There are no indications as to where in the relay I can attach the C. There is no board either with screw on connectors. I assume I will be linking via a wire nut that is already in place.
2-Wire Thermostat (R & W) Black w/White stripe and
White to terminal W. Red to
terminal R.
Power Input: Black & Blue
Heat Load 1: Red & L2
Heat Load 2: Black w/Red stripe & L2
