11-30-2022 08:02 AM
I am going from a standard Honeywell thermostat to the nest learning thermostat. I just want to make sure I have the correct wiring. Can anyone provide assistance?
11-30-2022 09:28 AM
Looks like a heat pump with Aux heat.
What is the aux heat type? Electric heat backup or is there a gas furnace that kicks on?
11-30-2022 12:34 PM
First, thank you returning a reply. All electric.
12-01-2022 06:32 AM
Any advice would be appreciated. I think that on the best that y to y1, g to g, r to r, c to c. What I don’t know is the o and the aux which is jumped to e. Thanks
12-01-2022 06:39 AM
I seen I had a typo. Nest no best.
12-01-2022 07:03 PM
White - W
Red - R
Orange - OB
Yellow - Y
Green - G
C wire - C
Tell Nest during setup it is a Heat Pump so the OB is for the Heat Pump.
And it is a forced air system
12-02-2022 08:27 AM
Thanks!
12-05-2022 11:07 AM
Hello folks,
I wanted to ensure that everything was covered here.
Thanks for assisting, @Houptee.
@Rjqasas, I hope you've got the answer you're looking for, and here's a quick link on how to install the Nest Thermostat that might help. If you're still in need of assistance, feel free to let us know.
Best,
Mark
12-08-2022 11:13 AM
Hey there,
I wanted to check in and see if you are still in need of any help. Please let me know, as I would be happy to assist, and answer any questions you may have.
Best regards,
Jake
12-09-2022 10:31 AM
Hey there,
I wanted to check in, and let you know that I will be locking the thread in 24 hours.
Best regards,
Jake