cancel
Showing results for 
Search instead for 
Did you mean: 
Replies are disabled for this topic. Start a new one or visit our Help Center.

wiring help for Trane system - heating when on cool

lbdgolfer
Community Member

I have a Trane thermostat with Cooling and 2 stage heat. I have wired it up but when the Cooling should be on it is blowing heat. I found the wiring manual for the original thermostat and confirmed the wiring for the nest. 

Thermostat pictures 

1 Recommended Answer

Patrick_Caezza
Platinum Product Expert
Platinum Product Expert

@lbdgolfer 

You have a heat pump system and must use the labels at the bottom.

Give this wiring a try,

White - W1 to W2/AUX

Green G to G

Orange - O to O/B

Blue - B to C

Yellow - Y to Y1

Red - R to Rc (jumper to RC not needed)


To ensure that I see your reply, please tag me using @Patrick_Caezza

View Recommended Answer in original post

2 REPLIES 2

Patrick_Caezza
Platinum Product Expert
Platinum Product Expert

@lbdgolfer 

You have a heat pump system and must use the labels at the bottom.

Give this wiring a try,

White - W1 to W2/AUX

Green G to G

Orange - O to O/B

Blue - B to C

Yellow - Y to Y1

Red - R to Rc (jumper to RC not needed)


To ensure that I see your reply, please tag me using @Patrick_Caezza

lbdgolfer
Community Member

@Patrick_Caezzathat corrected the cooling issue. When I tested the heat I wasn't getting any hot air but will retest in the morning.