Can't connect my nest point

[J1957]

I bought  a Nest  Router and a point . 
it is impossible to finish the mesh on my point.

i have been done everything that is recommended by the manufacture and all the advices of the community 

what else i can do?

 

 

[Luigismansion]

I’m having the exact same issue. I even called google customer care and was on call with them for 2 hours and they couldn’t resolve.

[J1957]

What google answer at the end???

my problem still persist

[J1957]

Not found any solution

Can't understand that Nest can give a solution, i'm not the only one that have this problem.

i read this in the internet too

[Jeff]

Hi J1957,

Sorry about the setup issues you're having. I know how frustrating it can be when tech isn't working right. Let's get this worked out. I do have a few suggestions for you to try. Apologies if you have already tried some of these steps.

• Try setup with the point next to the main router. Then once setup completes, you can move it to where it will be used.
• Try disabling bluetooth on your setup device during the setup process.
• If you use a VPN or web traffic filtering service, try disabling that during setup.
• If you have access to another device (tablet or spare phone), try completing setup on that device.

If you have given all these a try and are still having issues, please let me know.

Thanks,

Jeff

[Jeff]

Hi J1957,

I just wanted to check in real fast to see if you saw my reply and to find out if you still needed any help on this. If you're still needing assistance, please just let me know and I'll be happy to continue helping.

Thanks,
Jeff

[J1957]

Thanks Jeff if you read my messages, you will see that  still i can't resolve my problem

[Jeff]

Hi J1957,

Sorry you're still seeing issues. Are you able to provide the info from the questions I asked above? That will help us get going in the right direction for troubleshooting.

Thanks,

Jeff

[Jeff]

Hey again J1957,

I'm just following up again to see if you had that information for me. If you're still needing some help, I'll be here.

Thanks,

Jeff

[Jeff]

Hey everyone,

It looks like we've slowed down here. We'll be closing up the thread in the next day unless anyone else has any input or needs anything else. If so, just let me know and we can keep this open a bit longer.

Thanks,
Jeff