12-27-2021 12:36 PM
I just got my Google Nest wifi router to replace my onhub router.
I have also read other posts that state you have to reset the network before you can add it. My question, however, is that I have some port forwarding setup (have a synology NAS) and would like to save that information for use in the new network, but haven't found a way to back it up, other than recording the information and setting it up again by hand in the new network.
If there is a way to back it up, what is it? If not, then I'll just write down the info and do it by hand.
Thank you in advance.
12-27-2021 01:50 PM
There is currently no way to back up / export -> restore / import any settings when replacing the main point.
If you are replacing any secondary point(s), the config won't be gone when reseting them.
12-27-2021 02:46 PM
The OnHub is the primary router that is being replaced. The other point is a second gen Google wifi (the one that looks like a hockey puck).
Thank you, I'll be recording my information.
01-03-2022 03:49 PM
Hi, duke2106.
It looks like you and olavrb were able to sort this out, but I wanted to follow up real fast to see if you needed anything else here. If so, let me know and I'll be happy to help as well.
Thanks.
01-10-2022 11:01 AM
Hi, duke2106.
Just one quick final check in here. We'll be locking the thread in the next 24 hours, but if you still need help, I would be happy to keep it open. If there's more we can do, just let me know.
Thanks.
01-11-2022 12:22 PM
Hi, everyone.
As we haven't had any activity here recently I'm going to go ahead and close the thread. If you have more to add, feel free to start a new discussion.
Thanks