04-08-2022 07:54 AM
Hi,
Google Wifi (second gen) isn't accepting a new LAN IP. There aren't any error messages when I save, but when I go back into LAN IP settings, it reverts back to the previous settings. I've restarted and reset, but no different.
Has anyone else seen this?
D
04-08-2022 08:58 AM
What are you trying to change it to?
04-08-2022 09:08 AM
Changing from 192.168.86.1 to 150.63.113.1
04-08-2022 09:12 AM - edited 04-08-2022 09:15 AM
What you are trying to set is considered a global IP address.
LAN IP addresses in general must be RFC 1918 compliant.
But I agree that there should be a better error message on this, or even some validation in the app itself.
And maybe Google documentation could've mentioned this as well.
04-08-2022 09:37 AM
Thanks - I'll give that a try!
04-11-2022 01:59 PM
Hi, JayDeeDaz.
You may not have had a chance to try things out yet, but I wanted to follow up and see if things worked out for you on this. If you're still needing some help, just let us know!
Thanks.
04-11-2022 02:06 PM
Thanks for reaching out Jeff. I wanted that range as it what I was using on my old router, but if that's not available, then no worries. Thanks for the help!
04-14-2022 01:26 PM
No, problem JayDeeDaz. Thanks for checking back in and letting me know. Hopefully you can find a setup that works well for you.
04-20-2022 03:14 PM
Hey again, JayDeeDaz.
I just wanted to follow up and see if there was anything else you might need here. If there's any more you need, just let me know.
Thanks.
04-26-2022 01:57 PM
Hi, everyone.
Just one quick final check in here since activity has slowed down. We'll be locking the thread in the next 24 hours, but if you still need help, I would be happy to keep it open. If there's more we can do, just let me know.
Thanks.
04-29-2022 10:31 AM
Hi, everyone.
As we haven't had any activity here recently I'm going to go ahead and close the thread. If you have more to add, feel free to start a new discussion.
Thanks