Compatibility

[HSC]

Have been searching and trying things for over 3 hours with no luck. Any way to make this compatible? Thanks for any type of help as I am stuck.

[DaFish456 · Accepted solution]

So you would use Blue (C), Green (G1), Yellow (Y1) White (O/B), and Red (ONLY RH). You won’t need the jumper when installing the red. Has the same problem the other day but eventually found a guide from Nest made years ago.

hope that helps!

[HSC]

I ended up having to use a jumper but regardless you my friend ARE A ROCKSTAR!!!!!!!!!  Your wiring info was correct and we are now up and running. Without it I would still be frustrated and "nestless"!  Thank you so much for your help.

HSC

[Jeran]

Thank you for helping out on this thread, DaFish456!

Hey there HSC,

I'm glad to see that DaFish456 was able to help you! In that case, do you have any more questions or need any additional help? If not, I'll go ahead and lock this thread is 24 hours.

Best regards,
Jeran